How to install and maintain the Avalanche flush-mount metal floor vent/register?

Inspired by the majestic beauty of Mountains and the raw power of Nature, the Avalanche Flush Mount Metal Floor Vent incorporates a solid metal frame with an attractive grill design to be both a functional element and a stylish accent piece in any space. The vent is built with a sturdy 1/2" thick frame made of powder-coated aluminum to ensure a long-lasting vent that fits snugly at the top of your finished floor while providing high-quality air flow. Certain Avalanche models are available with dampers installed that allow the user to control airflow through to the room

Proper installation and maintenance of the flush mount should improve ventilation efficiency as well as improve overall aesthetics within any space.

How Do You Select the Right Size?

Before installing your new Flush Mount Metal floor vent, make sure to measure your duct opening lengths by the widths in inches (i.e., length x width).

Once you have the duct measurement, you can determine the correct size of flush mount floor vent to purchase. 

When Do You Install Your New Avalanche flush mount metal floor vent/Register?

Avalanche vents must be installed before or during flooring installation. Because they sit level with the floor surface, they cannot be added after the flooring is complete without disruption.

The Installation Process

The process of installing an Avalanche metal vent begins by properly positioning the aluminum frame and grill. Center the frame carefully on the substrate around the duct opening. Your frame must be level and sit evenly before securing.

To install the tile flooring frame, apply thin-set to the subfloor and press the frame into the thin-set. After this, use a trowel to lay more thin-set around the perimeter of the frame, then cut tiles to fit tightly against its outside edges. Once you have let the thin set cure and the tiles are set, you can then install the grill insert.

For hardwood, laminate wood, LVP or carpet floors, the frame should be installed first before the flooring is installed around it; constructing it in such a manner that the flooring material touches the edges of the frame, creating a Flush fit with the frame’s surface.

When you finish this installation, please ensure that your grill plate is properly fitted and not movable.

Strength and Design of the Product 

Metal Floor Vents have Powder Coated Aluminum Construction, which means that they will not break apart, flex, rust, chip or flake off under normal operating conditions while remaining attractive after extended periods of time. They have been tested for durability to support over 875 lbs of weight and can sustain high levels of use in multiple locations. 

Properly Maintaining Your Avalanche Metal Floor Registers 

Even though they are built to last, continued care will provide you with the best long term results. 

To clean the Avalanche vent cover of your respective floor register, use a soft bristle vacuum brush. This will help capture dust, debris, and other materials that might be stuck in the vent openings. Do not use a scrubbing pad, and do not use a chemical cleaner to clean the vent cover as this will remove some of the covering that protects your vent cover.

Another method is to clean the grille insert. Remove the grille insert if possible. Now, dip a cloth in hot water and mild soap to clean the insert. After cleaning, rinse and dry thoroughly, and then reinstall.

If your unit includes a damper, inspect it while cleaning. This will drive smooth movement. Remove trapped debris around the adjustment blades to get efficient airflow control.

Ensuring Durable Functionality  

To guarantee optimal alignment with the mounting system, the vent must be installed before the flooring is laid down. Although the vent is designed to be strong, do not place heavy pieces of furniture on the vent cover. In the interest of maintaining proper flow, do not cover the vent with an area rug.

Conclusion

For optimal Avalanche flush mount metal floor vent alignment, install during the flooring installation. While the vent cover is strong enough to support the weight of most furniture, do not place any furniture directly over the vent. Do not place any large/multiple rugs over the vent, as this will obstruct airflow.

The original owner of the Avalanche Flush Mount Metal floor vents is issued a lifetime warranty against all manufacturing and mechanical defects, and willful neglect, misuse, and installation errors are not covered.

The Avalanche Metal Floor Vent offers aesthetic strength and functionality and will provide reliable airflow for many years, as long as it is properly installed and cared for.